Harvia Virta Combi 10.5kW Electric Heater & Steamer Package
A 10.5 kW electric sauna heater with an integrated 2.1 kW steamer, combining traditional dry sauna heat with steam, herbal and fragrance modes, plus Xenio Wi-Fi control and 154 lb of sauna stones.
Traditional sauna heat and steam from one floor-mounted heater
The Harvia Virta Combi 10.5kW combines a high-output electric sauna heater with an integrated 2.1 kW steamer, allowing one unit to support traditional dry sauna sessions as well as steam, herbal and fragrance sauna experiences. Its 1.3-gallon water reservoir supports both automatic and manual filling.
Designed for sauna rooms from 177 to 635 cu. ft., the HL110SA holds up to 154 lb of sauna stones and uses a serviceable heating-element module for easier maintenance. The package includes the Harvia Xenio CX30C-U1-XW digital control system with Wi-Fi connectivity for temperature and humidity control, scheduling and remote operation through the MyHarvia app.
Harvia Virta Combi 10.5kW dimensions, capacity and installation details
| Specification | Harvia Virta Combi 10.5kW |
|---|---|
| Model | HL110SA |
| Heater type | Electric sauna heater with integrated steamer |
| Heater output | 10.5 kW |
| Steamer output | 2.1 kW |
| Maximum vaporisation | 2.5 kg/h |
| Sauna room capacity | 177–635 cu. ft. |
| Sauna floor area | 28–102 sq. ft. |
| Stone capacity | 154 lb (70 kg) |
| Water reservoir | 1.3 gal. |
| Voltage / phase | 240V / 1PH |
| Amperage | 29.2 A (2 groups) |
| Wire size | 10 AWG |
| Width | 16 in. (415 mm) |
| Depth | 19 in. (485 mm) |
| Height | 33 in. (840 mm) |
| Heater weight | 70.5 lb (32 kg) |
| Minimum ceiling height | 75 in. (1900 mm) |
| Control system | Harvia Xenio CX30C-U1-XW with Wi-Fi |
| Remote control | MyHarvia app |
| Installation | Floor-mounted / freestanding |
| Country of manufacture | Finland |
| Warranty | 2 years for consumer use |
Heater to wall or bench: 2 in. (50 mm) · Heater to ceiling: 42 in. (1060 mm) · Floor clearance under heater: 2.8 in. (70 mm) · Temperature sensor below ceiling: 4 in. (100 mm).
Always confirm the final dimensions, electrical requirements and installation clearances against the current Harvia Virta Combi installation and operation manual before wiring or building.Heater to guard fence: 2 in. (50 mm) on every side · Guard fence height above floor: 28 in. (711 mm) · Top of guard fence at least 1 in. (25 mm) below the top of the heater · Ventilation inlet: 4 in. (100 mm) above floor · Ventilation outlet: 6 in. (150 mm) below ceiling, or no lower than 24 in. (600 mm) above floor.
Sauna ventilation should allow the air to change approximately five times per hour. The optional Harvia HL3L safety railing is sold separately. Local electrical and building codes apply.
